CAPACITY |
Swing Diameter | mm | 200 | Grinding Diameter | mm | 50 | Admit between center | mm | 230 | Max grinding length | mm | 180 | Max weight of job between centers | kg | 20 | ABC / Max grinding length | mm | NA | Angle of approach | mm | NA | Grinding Diameter Max | mm | NA | PLC/CNC System | mm | NA | Swing over table | mm | NA | Grinding diameter Max. | mm | NA |
|
CARRIAGE (X AXIS) |
Slide stroke | MM | 160 | Rapid feed rate(On Dia) | m/min | 10000 | Minimum increment / Pulse (Feed Back Resolution) | mm | 0.0001 | Feed servomotor torque | Nm | 7 | Angle of approach | Deg | 0/30 | Guideway Type | | NA | Ballscrew | mm | NA |
|
WHEEL SLIDE ( X-Axis ) |
Slide stroke | mm | NA | Rapid feed rate ( dia ) | m/min | NA | Minimum increment/pulse (On dia) | mm | NA | Feed servo motor torque | Nm | NA | Angle of approach | Deg | NA | Wheel slide | | NA | Rapid feed rate | mm/min | NA | Minimum increment/pulse | mm | NA | Wheel approach | Deg | NA |
|
TABLE (Z AXIS) |
Table stroke | m/min | 420 | Rapid feed rate | mm/min/td> | 10000 | Minimum Increment / Pulse | mm | 0.001 | Ballscrew | mm | NA | Feed servomotor torque | Nm | 7 | Table slide | Nm | NA | Table type | Nm | NA |
|
WHEELHEAD ASSEMBLY |
Grinding wheel size (ODxWidthxID) | mm | 400x50x127 | Grinding wheel utilization | mm | 100 mm on dia | Spindle motor power(Induction type) | kW | 3.7 | Peripheral (surface) speed | m/sec | 33 | Spindle Bearing | Type | Antifriction | Spindle cone diameter | mm | 50 | Maximum Grinding wheel size (ODxWidthxID) | mm | NA | Spindle Bearing Cone diameter | mm | |
|
WHEEL HEAD |
Grinding wheel size ( ODxIDxWidth* ) | mm | NA | Spindle motor power ( Induction type ) | kw | NA | peripheral ( surface ) speed | m/sec | NA | Spindle Size | mm | NA | Type of spindle bearing | l (litre) | NA | Grinding wheel size ( ODxIDxWidth ) | mm | NA | Spindle rpm | rpm | NA |
|
WORKHEAD |
Taper bore | No | MT-4 | Spindle speed (3 Phase AC Induction motor) | rpm | 90-1000 | Spindle motor | kW | 0.75 | Dresser (Tailstock mounted) | Type | Blade type | Spindle speed (AC Servo Motor) {infinitely variable} | rpm | NA | Spindle motor torque | Nm | NA | Dresser (Work head) | Type | NA | Dead Centre with Induction Motor Drive | Kw | NA | Spindle Internal Taper | No | NA | Spindle speed range (Stepped pulley) | rpm | NA | Type | | NA | Centre taper | No | NA | Spindle speed ( infinitely variable ) | rpm | NA | Spindle motor power | Kw | NA | Motor torque | Nm | NA | Dresser (Work head/Table mounted ) | Type | NA | Dresser (Work head mounted ) | Type | NA |
|
TAILSTOCK |
Centre taper | No | MT-3 | Quill travel | mm | 25 | Micro Taper correction range | mm | ±0.035 | Quill Diameter | mm | NA | Taper correction range | mm | NA | Miro Taper Correction | Type | NA |
|
HYDRAULIC POWER PACK |
|
HYDRAULIC UNIT |
Tank capacity | Litre | NA | Motor power | kW | NA |
|
GENERAL |
Operation voltage | volts | 415±10% AC 3 Phase | Floor space with MGT standard cooalnt tank | mm | 1500 x 1500 | Machine weight Approx. | kg | 2000 | Machine weight | kg | NA | Connected Load(5.5) Kw Motor) | Kva | NA | Machine weight(Approximate) | kg | NA | Floor space LxBXH (without coolant unit) | mm | NA | Floor space | mm | NA | Floor space LxD (without coolant unit) | mm | NA |
|