| CAPACITY |
| Swing over table | mm | 500 | | Grinding Length | mm | NA | | Grinding diameter | mm | 40-100 | | Maximum weight between center | kg | NA | | Max. Component length | mm | 1200 | | Height from floor to centre with 120 mm pad | mm | 1300 | | Max. weight of job between centres | kg | 300 |
|
| WHEEL HEAD |
| Grinding wheel (OD X ID X WxT*) [MAX.] | mm | NA | | Wheel peripheral speed | m/sec | NA | | Spindle power | kW | NA | | Wheel head spindle | | NA | | Wheel head spindle lubrication | | NA | | Grinding wheel size (max.) | mm | 1066x304.8x50(BFL Supply) | | Grinding wheel size (Min - throw away.) | mm | 750 | Spindle motor power (Induction type)
Peripheral (surface) speed | kW | 22 / 1500 Rpm | | m/sec | 60 | Spindle Taper
Spindle Brg Dia
Auto balancer ( Marposs) | | 1:10 dia 115 | | 120 mm | | Inside Spindle type |
|
| WHEEL SLIDE (X-Axis) |
| Slide stroke | mm | 420 | | Rapid feed rate (dia) | mm/min | 10000 | | Minimum increment/pulse | mm | 0.0001 | | Motor torque | Nm | 22 Nm |
|
| X AXIS |
| WHEEL SLIDE AXIS-X-AXIS | | NA | | Feed servo Motor Torque | Nm | NA | | Guide way | Type | NA | | Slide Stroke | mm | NA | | Rapid Feed Rate (On dia) | mm/min | NA | | Min. increment pulse | mm | NA | | Feedback System | | NA |
|
| TABLE (Z-Axis) |
| Table stroke | mm | 1200 | | Rapid feed rate | mm/min | 10000 | | Minimum increment/pulse | mm | 0.0001 | | Table type | Integral | | Motor torque | Nm | 22 Nm | | CNC DRESSER (On wheel head) | | NA | | Dresser Type | | Needle type diamond fliese |
|
| CROSS SLIDE AXIS-Z-AXIS |
| Feed servo Motor Torque | Nm | NA | | Guide way | Type | NA | | Slide stroke | mm | NA | | Rapid Feed Rate (On dia) | mm/min | NA | | Min. increment pulse | mm | NA | | Feedback System | | NA |
|
| WHEEL DRESSER SLIDE (feed axis) |
| Slide stroke | mm | 200 | | Rapid feed rate (dia) | mm/min | 7500 | | Minimum increment/pulse | mm | 0.0001 |
|
| WHEEL DRESSER SLIDE (cross axis) |
| Slide stroke | mm | 120 | | Rapid feed rate | mm/min | 7500 | | Minimum increment/pulse | mm | 0.0001 |
|
| WORK HEAD |
| Type | | NA | | Centre taper | No | MT-6 | | Spindle speed ( infinitely variable ) | rpm | 30-240 | | Motor torque | Nm | 22 Nm |
|
| TAILSTOCK |
| Centre taper | No | MT-6 | | Quill diameter | mm | 100 | | Quill travel | mm | 100 | | Micro Taper Correction | mm | NA | | Max. Speed | rpm | 15000 | | field_tailsto_cra_sha_grin | | vertical |
|
| DRESSER |
| Type | mm | NA | | Max. Speed | rpm | NA | | field_tailsto_cra_sha_grin | | NA |
|
| GENERAL |
| Operation Voltage | volts | NA | | Floor Space (w/o coolant tank) | mm | NA | | Machine Weight | kg | NA |
|
