spark

The SPARK being one of the smallest vertical drill tap machining center is ideally suitable for small aluminium & cast iron components on mass production basis .The Spark is compact, powerful and a perfect machine for any workshop, occupying an area of 1400*2150 mm*mm and height of 2500mm. As the style of spark produced depends on the operation, this spark is sure to set fire in aspects of productivity, quality and reliability. Despite its compactness the machine is capable of taking max load of 150 kgf on the table.

  • Most economical drill tap machining center
  • Rigid spindle with improved L / D ratio
  • 20 / 20 /15 m/min rapid rate for X/Y/Z axes
  • 8 tool ATC

Read More

The spark XL is compact & economical machine with increased strokes & rapids compare to spark ideally suitable for aluminium & cast iron application with capable of taking max load of 200 kgf on the table. The machine is loaded with table size of 650*310 mm & has stroke size of 400*300*250 along x,y & z axis respectively

  • Compact machine with increased strokes & table size
  • 36 / 36 / 36 m/min rapid rate for X/Y/Z axes
  • High Spindle speed of 8000 rpm
  • 8 tool ATC

Read More
Dart S

The Dart s is a small compact Vertical Machining Center for small size components of Steel, Aluminium & Cast Iron. Dart s machine is offered with BT-30 / BBT-30 spindle taper with 12 tools ATC & higher rapid traverse to achieve higher production. The machine is suitable for components of size 300 mm cube. Apart from the strong machine structure the machine also boasts about the unique armless tool changer with bidirectional turret type carousel for 12 tools.

  • Ergonomically designed structure for good rigidity and weight ratio
  • BT-30 / BBT-30 spindle
  • 12 tool ATC
  • Chip to chip time of 2.7 sec
  • Disc armless type tool changing system
  • 50 / 50 / 40 m/min rapid rate for X/Y/Z axes
  • High Spindle speed of 8000 rpm or 10000 rpm

Read More
DTC 400

The DTC-400 is compact and powerful machine to match every possible application. High precision LM guideways, ball screws and high rapid traverse helps in achieving high degree of positional accuracy at faster rate. The machine is loaded with table size of 650*400 mm and has stroke size of 500*400*320 mm along x, y and z axis respectively. With a rigid structure and high precision parts one can achieve high accuracy and productivity.

  • Compact machine
  • BT-30 / BBT-30 spindle
  • 12 tool ATC
  • Chip to chip time of 2.7 sec
  • Disc armless type tool changing system
  • 48 / 48 / 40 m/min rapid rate for X/Y/Z axes
  • High Spindle speed of 8000 or 10000 rpm with direct drive spindle

Read More
DTC 400 XL L

The DTC-400 XL is a powerful, bigger machine loaded with BT-30/BBT-30 spindles. The machine is built with optimally designed structure to take care of cutting forces, cushioning high speed and accurate tapping. The machine is engineered for cost effectiveness yet retaining the rigidity of the structure. The machine is equipped with roller type LM guideways for delivering better rigidity and superior performance. The machine has high rapid traverses of 60/60/48 m/min on the 3 linear axes respectively. The quick return function enables accurate tapping and reduction in cycle time. The DTC-400 XL-L is equipped with High speed Pocket tilting type Automatic Tool Changers with 16 tool capacity with chip to chip time of 1.8 sec, designed based on the machine size and suitable application. With a rigid structure and high speeds one can achieve high accuracy and productivity on these drill tap machining centers.

  • High Speed Drill Tap center with maximized cutting time
  • Pocket tilting type front mounted ATC
  • Chip to Chip time of 1.8 sec
  • 16 tool ATC
  • 50 / 50 / 48 m/min rapid rate for X/Y/Z axes
  • High Spindle speed of 10000 or 12000 rpm with direct drive spindle

Read More
DTC 400 XL

The DTC-400 XL is compact and powerful, loaded with BT-30/BBT-30 spindles. The machine is built with optimally designed structure to take care of cutting forces, cushioning high speed and accurate tapping. The machine is engineered for cost effectiveness yet retaining the rigidity of the structure. The machine is equipped with roller type LM guideways for delivering better rigidity and superior performance. The machine has high rapid traverses of 60/60/48 m/min on the 3 linear axes respectively. The quick return function enables accurate tapping and reduction in cycle time. The DTC-400 XL is equipped with High speed Pocket tilting type Automatic Tool Changers with 16 tool capacity with chip to chip time of 1.8 sec, designed based on the machine size and suitable application. With a rigid structure and high speeds one can achieve high accuracy and productivity on these drill tap machining

  • High Speed Drill Tap center with maximized cutting time
  • Highly rigid structure
  • Pocket tilting type front mounted ATC
  • Chip to Chip time of 1.8 sec
  • 16 tool ATC
  • 60 / 60 / 48 m/min rapid rate for X/Y/Z axes
  • High Spindle speed of 10000 or 12000 rpm with direct drive spindle

Read More
super dart

SUPER DART is a drill tap machining center superior in all aspects of machining capabilities. The machine comes with a BT-30 spindle & HSK A50 as optional and has the highest torque carrying capacity. It is equipped with high speed side mounted ATC with 20 tool capacity. The machine is equipped with roller type LM guideways for delivering better rigidity and superior performance. It also comes with an option of both front and linear pallet changer enhancing productivity in all terms.

  • Ergonomically designed structure for outstanding dynamic rigidity
  • 20 tool ATC
  • BT-30 / BBT-30 / HSK A50 spindle
  • 50 / 50 / 40 m/min rapid rate for X/Y /Z axes
  • High Spindle speed of 8000 or 10000 rpm with direct drive spindle
  • Twin arm tool changer

Read More