Tailstock With Antifriction Guideways

Printer-friendly versionSend by emailPDF version
Blog

Objective : Rigid Tailstock, providing consistency in ground components output quality i.e. taper, cylindricity etc.

Tailstock with Antifriction Guideways is designed suitably for Micromatic Grinding Technologies OD Grinding machines available with MT 4 or MT 5 taper, having below benefits.

  • Quick and ease in setting due to smooth movement on Antifriction Guideways.
  • Higher accuracy of position due to no quill movement.
  • Increase in Tail stock stiffness by 25% in comparison with other available tailstocks.
  • Total cycle time reduction by 3 seconds to 4 seconds due to less movement of quill.
PARAMETERS TAIL STOCK
Type of Tail Stock Double Acting Tail Stock Quill Dia :100 Single Acting Tail Stock Quill Dia :63 Tail Stock with No Quill & with Antifriction Guice Ways
Stiffness @Centre in Kgf/microns 3.43 Kgf/μm 1.82 Kgf/μm 4.57 Kgf/μm

Add new comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.