Blog

AMS Rod Image

Connecting rod is an engine component that transfers motion from the piston to the crankshaft and functions as a lever arm. Connecting rods... Read More

Concave-machine

Concave tuning on CNC machines is a simple circular interpolation. In spite of perfect calculation of coordinates, the result on the component (quality) depends on many other techniques and parameters specially if the quality need is for a perfect blue matching, no step left out at center and... Read More

Ace Micromatic, the largest machine tools conglomerate in the country and has been growing at a steady pace over three decades. AceMicromatic group nurtures ambitious plans to move up the value-curve by offering design driven ‘Industry 4.0 ’ solutions to customers such as customised OEE (... Read More

Production Grinding machines  which run 24×7 require automatic load-unload system which are economical

Challenge:

Large production of medium weight parts e.g. automotive transmission shafts, etc. requires loading & unloading of the same... Read More

Case Study:

Productivity Enhancement in Aerospace Component Machining

The Need:

Machining of Aerospace Components with a non-AMS machine was taking longer time, requiring multiple set-ups and the finish was sub-optimal.
... Read More

Lube it right - Main image

Lubrication of the Chuck

  • Most chucks fail to perform due to lack of lubrication resulting in faster chuck base jaw wear out and loss of gripping force. This may result in accidents and even inaccuracy of components.
  • Normally, chuck greasing is... Read More

How to make more profits from my production shop? How do I increase the productivity of my machines? Are these the questions that are there on the top of your mind? Be it a small family run job shop or a large professional organisation, Productivity improvement & Profit maximisation are... Read More

Manufacturing components as per drawing at a lesser lead time and reduced cost is essential to ensure... Read More

Carbon-Graphite-Bush-Bore-Grinding

Carbon graphite bushes are used in pump shafts as bearings, providing self-lubrication. Graphite provides higher running life (lower wear) due to its much lower coefficient of friction than metals & bronzes.

The solution required MGT to overcome the biggest obstacles while... Read More

Comparison of Box Guide Ways Vs Linear Motion Guide Ways for Machine Tool applications

The four main issues associated with selection of either box guide ways or linear motion guide ways are speed, rigidity, load carrying capacity and... Read More

Pages

Subscribe to Blog